NetXpertXG

NetXpert XG

Test vos cable Ethernet et vérifie/garantie la vitesse limite de ces cables.

Les vitesses des ” Wireless Access points” dépassent souvent, les vitesses de cablage installé dans le réseau . Est il possible que vos cables gèrent des vitesses bien au delà de leurs spécifications ? Est il possible que vos cables CAT5e ou CAT6 puissent atteindre des vitesses de 1GBits/S voire 10Gbits/s

Pour le savoir, une simple fonction sur le NetXpert XG, permettent d’effectuer 3 tests. Effectue un test de vitesse en envoyant 1Gb/s de données via votre cable ( Test BERT ) et il prouvera si celui ci fonctionera au-delà  des spécifications et suivra la vitesse des “Access Points” installés

Le NetXpert est le seul testeur de cables et gestionnaire de réseaux actif a effectuer  un test de taux d’erreurs sur les bits ( BERT ) , un test de signal Signal/bruit ( SNR) et retard de vitesse de 1Gb/s, 5Gb/s ou 10Gb/s en appuyant sur une touche. Vous pouvez maintenant effectuer des tests de débit en temps réel pour valider vos cables jusqu’à 10Gb/s.

Test le taux d’erreurs, le bruit et le delai de propagation instantanément

En effectuant un test de taux d’erreur sur les bits ( BERT ) et selon les normes IEE802.3an, le NetXpert XG vous certifie ou non, une transmission de données sans erreur jusqu’à 10Gb/s

Test automatique avec une “touche” comprends le rapport Signal/bruit ( SNR) et le décalage temporel, qui peuvent avoir un impact significatif sur la transmission Gigabit

Le rapport “signal/bruit” vérifie que le bruit est suffisamment faible et que le signal est suffisamment élevé pour une transmission fiable. Le “delai de propagation” indique un décalage entre les paires de fils. Un retard excessif peut entrainer un sérieuse dégradation de la transmission et donc de la performance.

Les 3 mesures fondamentales pour déterminer si une transmission est fiable ou non, peuvent être effectuées à l’aide d’une seule touche. La mesure faite, vous pouvez réitérer immédiatement à l’aide de cette unique fonction. Chaque mesure est archivée et est fournis à un rapport de synthèse final au format PDF, CVS ou XML

The cable qualifier that is defining a new category — the cable project qualifier

If you are a cable installer, network owner, network builder, or system integrator, you’ll be excited to hear that NetXpert XG includes a project editor and auto test generator for up to 1000 cables, and test reports you can keep for your records or leave with your customer.  Once the tests are created, plug in the cable, click test, and NetXpert XG starts testing the cable to IEEE 802.3 standards to prove the speed of your cable.  Not only do you get a wiremap and cable length, NetXpert XG tests BERT, SNR, Delay Skew, distance to opens, shorts, or miswires.  As a bonus you get active network tests for copper, fiber, and wireless.  And, with 2 NetXpert XG local units, you can test fiber cables.

Cable Project Qualifier

  • Use the project editor, cable test editor, test label editor to pre-configure your cable testing projects
  • Press test to automatically sequence up to 1000 cable tests from the local or remote device to increase cable testing efficiency when working alone
  • Test data cabling for IEEE 802.3 compliance at data rates up to 10 Gb/s (BERT)
  • Determine signal-to-noise ratio (SNR) for compliance up to 10 Gb/s
  • Measure delay skew for compliance up to 10Gb/s
  • Measure length of cable with TDR and capacitance measurements for highly accurate test results and easier troubleshooting
  • Full-color wire map shows distance to open, distance to short, miswires, split pairs, and shield on a color graphical display
  • Save test results and generate standards-based measurement reports providing “Pass/Fail” indication in pdf, csv, or xml format

Perform active network management

  • Support for IPv4 and IPv6
  • Discover your network and see the connected network devices
  • Identifies defective PoE switches with a PoE load test
  • DHCP test
  • Ping lists can be defined and saved for later use
  • LLDP/CDP detection and analysis
  • Identifies VLANs present in your network
  • Data transfer from the tester to the PC using USB stick, wireless, or bluetooth connectivity
Length Measurement Technology Time-Domain Reflectometry (TDR) and capacitance
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft (30 cm))
Distance to fault: 0 to 656 ft (200 m) ± (5% + 3ft (1m))
Supports 8 wiremap remotes (RJ 45) and 24 RJ-45 ID only
remotes
Power over Ethernet (PoE) Test supports IEEE 802.3af PoE (Type 1, max 15.4W),
IEEE 802.3at PoE+ (Type 2, 30W) and 802.3bt PoE++ (Type 3, 60W)
Future proofed for IEEE 802.3bt Type 4 100W higherpower PoE
Active Ethernet Network and test support by interface:
Copper RJ-45 interface –100/1,000/2,500/5,000/10,000 Mb/sec link speeds
Fiber SFP+ #1 interface supports 10Gb/sec link speed
Fiber SFP+ #2 interface supports 1Gb/sec link speed
WiFi 802.11 a/b/g/n 2.4 Ghz WiFi and Bluetooth
Maximum Voltages Maximum voltage that can be applied to any 2 connector pins without causing damage to the tester:
RJ-45: 60 VDC or 50 VAC
Save Test Results Stores virtually unlimited cable or network tests with user defined names per project
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, German, French, Spanish
Battery Li-Ion, 7.2 VDC, 3.1A-hr (typical)
Battery Life at 10Gb: 5 hrs minimum, 24 hrs stand-by
Temperature Operating: 14 to 140° F (-10 to 60°C)
Storage: -22 to 158°F (-30 to 70°)
Humidity 10 to 90% non-condensing
Enclosure Injection molded plastic
Display 7″ Color TFT-LCD capacitive touch display,
1024 x 600 resolution (WSVGA)
Size 245 x 177 x 73 mm (main unit)
130 x 177 x 55 mm (Active Remote)
Weight with Battery 2.6lbs (1.2 kg) main unit
1.3lbs (0.6 kg) Active Remote

Information – uaGate SI

OPC UA Server Gateway with MQTT Support for SIMATIC S7 Controllers

uaGate SI makes data integration easier than ever before.

The gateway supports the connection of SIMATIC S7-300, S7-400, S7-1200 and S7-1500 controllers from Siemens and uses the OPC UA standard for a simple and secure data integration of new and existing plants in higher-level management systems, such as ERP, MES or SCADA systems.

In addition, uaGate SI also offers MQTT Publisher functionality, enabling direct integration of PLC data into private or public IoT cloud applications on the IT side. The generic MQTT implementation supports the use of a large number of different cloud providers. Similar to the OPC UA standard, MQTT also supports various security mechanisms such as encrypted connections, certificates and user authentication, thus contributing to a high level of data security.

With this functionality, uaGate SI is a compact, secure, future-oriented and proven gateway for data integration.

Access to Siemens PLC Data from OPC UA Applications

  • Access to SIMATIC S7-300, S7-400, S7-1200 and S7-1500 controllers
  • Support of optimized data blocks in SIMATIC S7-1200 and S7-1500 controllers
  • Integration of higher-level management systems like ERP, MES or SCADA using integrated OPC UA Server providing open, platform-independent and market-proven communication
  • Easy local and global access to field data and routing through firewalls
  • Especially dedicated to retrofit upgrades, thus protecting former investments
  • No need for software updates, operating system patches and PC updates resulting in years of failure-free operation
  • No PLC programming or dedicated PC required

Optimized for Siemens Integration

  • Symbolic name import from Siemens TIA Portal and SIMATIC STEP 7 projects
  • Namespace configuration by browsing of SIMATIC S7 1200/1500 variables
  • Easy setup of OPC UA Server requiring only a few steps for accessing Siemens PLC data
  • Web interface for gateway configuration

Industry-proven Security

  • Physically separated interfaces and separate configuration rights for OT and IT networks preventing intrusions
  • Supporting security standards as SSL/TLS and X.509 certificates
  • OPC UA compliant data encryption and user authentification
  • Security supported for MQTT communication with private and public clouds

 

 

mbGate PB

Passerelle : Réseaux Modbus TCP vers des réseaux PROFIBUS PA/DP

Avec la passerelle mbGate PB, nous pouvons désormais intégrer jusqu’à 2 segments PROFIBUS PA et 1 segment PROFIBUS DP à un système de controle Modbus TCP. La passerelle agit comme un serveur Modbus TCP  et un maitre PROFIBUS. Avec cette gateway, le cout de l’intégration est considérablement réduit.  Elle permet la paramétrisation et l’utilisation des outils standard de management.

Key Component for Transition to State-of-the-Art Technology

  • Simple replacement of installed PROFIBUS DP/PA segment couplers
  • Re-use of existing PROFIBUS segments without requiring modification

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP and PROFIBUS PA segments from Modbus TCP networks
  • Acting as Modbus TCP Server and PROFIBUS PA and PROFIBUS DP Master
  • Support of one PROFIBUS DP segment and up to two PROFIBUS PA segments

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major Modbus engineering tools such as Schneider Unity Pro or Siemens TIA Portal
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

MODBUS/TCP Redundancy

  • Supports the use of two redundant PLCs and two redundant gateways
  • Easily enabled via licensing
  • Full control of redundant operation mode via engineering and PLC
Scope of Delivery
Hardware mbGate PB Gateway
Documentation On Website
Order Numbers
GCA-EN-024808 mbGate PB, Modbus TCP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).
Additional Products and Services
LRA-EN-024851 gatePlus HighAvailability, License for activating redundancy features in mbGate PB
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-EL-024802 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-EL-024804 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
GCA-EN-024806 mbGate DP, Modbus TCP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Video Channel : Retrouvez nous sur notre page channel YOUTUBE 

epGateDP

Passerelle pour connexion d’esclaves PROFIBUS DP vers contrôleurs Ethernet/IP

Connexion simple d’appareils esclaves PROFIBUS DP aux systèmes de contrôle Ethernet / IP via mapping interne

Avec l’epGate DP, il est possible d’intégrer un segment PROFIBUS DP dans des systèmes de contrôle Ethernet / IP. Avec epGate DP, les coûts d’ingénierie peuvent être réduits car il réutilise le segment PROFIBUS DP existant sans la modifier. Il permet la configuration, le paramétrage et la gestion des actifs de l’installation à l’aide d’outils industriels standard.

epGate DP

Configuration, Parameterization and Plant Asset Management Using Standard Industry Tools

  • Supports major EtherNet/IP engineering tools such as Studio 5000 and AMS Device Manager
  • Included CommDTM allowing use in FDT/DTM frame applications
  • EDD-based device parametrization using Siemens Simatic PDM

Direct Connectivity to PROFIBUS Segments

  • Single access point to PROFIBUS DP segment from EtherNet/IP networks
  • Acting as EtherNet/IP device (adapter) and PROFIBUS DP master
  • Support of one PROFIBUS DP segment

Composant clé de la transition vers les technologies de pointe

  • Réutilisation des segments PROFIBUS existants sans modification
  • Prise en charge des systèmes de contrôle communs, par exemple Emerson DetlaV ou Rockwell Control Logix
  • Prise en charge du DLR pour la communication redondante dans l’anneau avec EtherNet / IP
Livraison
Hardware Passerelle epGate DP
Documentation sur notre site Web
Références
GCA-CN-024706 epGate DP, EtherNet/IP to PROFIBUS DP Gateway. Supports 1 PROFIBUS DP segment (RS485).

Retrouvez tous les téléchargements SOFTING  sur notre mirroir #1

Power Conditionner – 9412/00-310-11S

9412

9412 Series – Power Conditionner

Single or redundant 9412 series fieldbus power supplies are used to supply an FF H1 High Power Trunk with up to 28 V/500 mA, and up to 1 A in Boost mode. In the background, they measure the advanced physical layer parameters, which can be reported via an Android smartphone, configurable integrated alarms or online via FF H1. 9419 series bus carriers or DIN rails can be used for installation.

  • For single or redundant power supply to FOUNDATION Fieldbus H1 segments (High Power Trunk)
  • Output > 28 V, up to 1 A, galvanically separated
  • Integrated advanced physical layer diagnostics

General

WebCode 9412A
Product Variant Fieldbus Power Supply
Product Type 9412/00-310-11s
Product Description ISbus fieldbus technology Fieldbus power supply
Highlights For single or redundant power supply to FOUNDATION Fieldbus H1 segments (High Power Trunk)
Output > 28 V, up to 1 A, galvanically separated
Integrated advanced physical layer diagnostics
Functional Description Single or redundant 9412 series fieldbus power supplies are used to supply an FF H1 High Power Trunk with up to 28 V/500 mA, and up to 1 A in Boost mode. In the background, they measure the advanced physical layer parameters, which can be reported via an Android smartphone, configurable integrated alarms or online via FF H1. 9419 series bus carriers or DIN rails can be used for installation.
Description fieldbus power supply and diagnostics
Application range (zones) 2, 22
IECEX gas certificate IECEx BVS 09.0043X
ATEX gas certificate BVS 09 ATEX E 099 X
Certificate EAC TS RU S-DE.GB04.B.00081
Gas explosion protection IECEx Ex nA nC IIC T4 Gc
Gas explosion protection ATEX II 3 G Ex nA nC IIC T4 Gc
Gas explosion protection EAC 2 Ex nA nC IIC T4 Gc X
Certificates ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), International (FF), USA (FM)
Number of channels 1
Supply voltage DC 24.00 V
Segment supply Ua ≥ 28 V DC
Segment supply Ua note Other voltage variant for ic-FISCO and entity on request
Nominal voltage 24 V DC
Max. power dissipation 2.75 W
Max. power dissipation note at 500 mA output current and 24 V auxiliary power
Segment supply Ia 500.00 mA
Segment supply Ia note Up to 1 A in boost mode
Error message Overload and short circuit
Error messaging device Relay contact (30 V DC/100 mA)
Fieldbus Specification IEC 61158-2, FOUNDATIONTM fieldbus H1 FF-831
Ambient temperature min. -20 °C
Ambient temperature max. +70 °C
Ambient temperature -20 °C … +70 °C

mbGate PA

mbGatePA

Passerelle : MODBUS TCP vers Maitre PROFIBUS PA

Connexion simple d’esclaves PROFIBUS PA à un système de contrôle Modbus via mapping interne I/O

Avec la passerelle mbGate PA, il est possible d’intégrer jusqu’à 4 segments PROFIBUS PA dans des systèmes de contrôle Modbus TCP. Il agit en tant que serveur TCP Modbus et maître PROFIBUS PA. Grâce à nos passerelles, les coûts d’ingénierie peuvent être réduits, car elle réutilise les alimentations “Power conditionners”  existants dans des projets de mise à niveau. Il permet la configuration, le paramétrage et la gestion des esclaves de l’installation à l’aide d’outils industriels standards.

 

Elément clef pour une transition à la pointe de la technologie

  • Simple remplacement de segments coupler PROFIBUS DP/PA
  • Ré utilisation de segments existant PROFIBUS PA, sans modificiations

Connectivité directe aux segments PROFIBUS

  • Fonctionne comme serveur MODBUS et Maître PROFIBUS PA.
  • Connecte jusqu’à 4 segments PROFIBUS PA à MODBUS TCP

Configuration, Parametrisation et Gestion des esclaves en utilisant les outils standards industriels

  • Supporte la majorité des outils Modbus comme Schneider Unity Pro ou TIA Portal de Siemens
  • Incluant CommDTM et permetant l’utilisation des logiciels ” Frame applications”  FDT/DTM.
  • Parametrization des esclaves basés sur EDD, utilisant le logiciels Siemens Simatic PDM

Scope of Delivery
Hardware mbGate PA Gateway
Documentation On Website
Order Numbers
GCA-EL-024802 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 2 PA segments (up to 32 PA devices).
GCA-EL-024804 mbGate PA, Modbus TCP to PROFIBUS PA Gateway. Supports up to 4 PA segments (up to 64 PA devices).
Additional Products and Services
LRL-DY-134501 dataFEED OPC Suite, Version 4.01 and higher, including all supported PLC protocols, support for OPC UA, access for any number of dataFEED OPC Tunnel Clients, for simultaneous access to a total of up to 100 OPC UA Servers, OPC Servers and OPC Tunnel Servers, and many more Functionalities such as Database and File Access, Data Exchange, Optimizer, Concentrator and Bridge
GCA-EN-024806 mbGate DP, Modbus TCP to PROFIBUS DP-Gateway. Support of 1 PROFIBUS DP segment (RS485).
GCA-EN-024808 mbGate PB, Modbus TCP to PROFIBUS Gateway. Supports 2 PA segments (up to 32 PA devices, MBP physical layer) and 1 PROFIBUS DP segment (RS485).

Retrouvez tous les téléchargements SOFTING  sur notre mirroir #1

uaGATE 840D

Passerelle : serveur OPC UA pour les controleurs Siemens SINUMERIK 840D

Cette passerelle permet la lecture de toutes les données de la machine outil SINUMERIK 840D. Elle peut aussi accéder aux parties NC avec son axe, outil, programme and données, ainsi que les alarmes spécifiques. De plus, une connexion à la SIMATIC Siemens S7 peut être établie. Les données des 2 connexions sont disponibles via  l’OPC UA et l’interface MQTT et peuvent être utilisées pour des applications “Industrie 4.0 Applications ”

Avec la passerelle uaGate 840D, des données importantes sur la broche et les axes, telles que le couple et la consommation électrique, peuvent être lues et réutilisées pour de nombreuses applications.En outre, le programme actif ainsi que les sous-programmes et l’outil actuellement utilisé sont accessibles. Par exemple, ces données sont disponibles pour la surveillance des conditions, la maintenance prédictive, pour la journalisation des données ou pour des tâches d’analyse, telles que la surveillance des broches et des axes. La passerelle peut également être utilisée pour acquérir des données à partir de contrôleurs SINUMERIK 840D plus anciens. Grâce au fichier de symboles de données préconfiguré pour le cas d’utilisation standard basé sur un canal, trois axes et une broche, l’utilisateur n’a besoin d’aucun savoir-faire SINUMERIK spécifique pour la lecture des données.

Le produit peut simplement être monté à côté de la NCU SINUMERIK sur un rail DIN et nécessite une alimentation 24 VDC. Il dispose de deux interfaces Ethernet indépendantes, l’une adressant la machine et l’autre, le réseau informatique. Entre ceux-ci, la passerelle agit comme un pare-feu. La configuration s’effectue en quelques clics à l’aide de n’importe quel navigateur Web et du serveur Web intégré

Accès aux données du noyau Siemens SINUMERIK PLC et NC

  • Accès à de nombreux contrôleurs Siemens Solution Line SINUMERIK 840D différents
  • Intégration de données dans des outils de gestion de niveau supérieur tels que les systèmes ERP, MES ou SCADA
  • OPC UA Server intégré offrant une communication ouverte, indépendante de la plate-forme
  • Accès à la zone CN contenant l’axe, l’outil, le programme, les données d’entraînement et des alarmes spécifiques
  • Utilisation des données à des fins d’analyse, de surveillance des conditions, de maintenance prédictive ou d’enregistrement de données
  • Licences Siemens supplémentaires non nécessairesAucune programmation d’API ou d’unité CN requise pour la configuration

Configuration facile et simple

  • Utilisation de fichiers de symboles prédéfinis pour les configurations standard, comme un canal avec une broche et trois axes (quatre lecteurs)
  • Téléchargement de fichier AWL de fichiers de symboles NCVar Selector définis par l’utilisateur pour la connexion au noyau NCImportation facile de symboles à partir de projets SIMATIC STEP 7 pour la connexion à un automate
  • Configuration de la passerelle à l’aide de tout navigateur Web standard et serveur Web intégré

Sécurité  au niveau industriel

  • Interfaces Ethernet physiquement séparées protégeant SINUMERIK de tout accès non autorisé via un réseau informatique
  • Prise en charge des normes de sécurité telles que SSL / TLS, les certificats X.509 et l’authentification des utilisateurs pour la communication OPC UA et MQTT
Hardware Processor Altera Cyclone V SoC with Dual-core ARM Cortex-A9
Connectors 2 x IEEE 802.3 100BASE-TX/10BASE-T (independent interfaces)
Status LEDs PWR (power supply), RUN (running), ERR (error), SYS (configuration)
Dimensions (H x W x D) 100 mm x 22.5 mm x 105 mm
Power Supply 18 VDC … 32 VDC, SELV/PELV supply mandatory Typically 200 mA, maximum 1 A at switch-on
Operating Temperature, Horizontal DIN Rail Installation -40 °C .. 50 °C (0 mm minimum distance)
-40 °C .. 55 °C (22.5 mm minimum distance)
Operating Temperature, Vertical DIN Rail Installation -40 °C .. 35 °C (0 mm minimum distance)
-40 °C .. 40 °C (22.5 mm minimum distance)
Storage Temperature -40 °C .. 85 °C
Relative Humidity 10 % … 90 %, non-condensing
Weight About 0.2 kg
Mounting DIN Rail (35 mm)
Housing Phoenix Contact ME MAX
Protection Class IP20
Software Protocols SIMATIC S7, SINUMERIK, OPC UA (Server, 20,000 items in total), MQTT (Publisher, up to 1,000 topics)
Supported Controllers Siemens SINUMERIK 840D Solution Line, software version 4.3 and higher
Supported Engineering Tools Siemens NCVar Selector
Conformity Emission EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55011, Group 1, Class A
EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 55022, Class A
EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-4
FCC CFR45, Part 15 Section 15.107 and 15.109 (Class A),
VCCI Class A Information Technology Equipment 2002
Immunity EC Directive 2004/108/EC “Electromagnetic Compatibility”, EN 61000, Part 6-2
Certifications CE, FCC, RoHS
GAA-YX-145144 uaGate 840D
6FC5851-1XC45-4YA8 SINUMERIK 840D sl CNC software and SINUMERIK Operate, toolbox including NCVar Selector
(please order directly from Siemens)

Livraison…

Hardware uaGate 840D
Software Tool for configuration over integrated web interface
Documentation Quick Startup Guide (printed documentation)

Performance

  • La Passerelle uaGate 840D, peut collecter jusqu’à 20000 variables
  • Fréquence d’échantillonage : dépends de nombreux parametres. On peut donner une approximation entre [ 15 ms – 80ms ]

dataFEED Exporter

dataFEED Exporter : Export of Siemens Symbols from TIA Portal or STEP 7

Simple Symbol Export

  • Export of symbolic names from Siemens TIA Portal and SIMATIC STEP 7 projects
  • No TIA Portal or STEP 7 know-how required for exporting symbol information
  • Selection of data blocks to be available via Softing products
  • Later adjustment of .sdfi file by adding/deleting individual symbols
  • Chance for changing symbol names afterwards
  • Smart wizard for export in a few steps
  • Display of symbol and syntax information via tooltips

Secure Encrypted Softing Symbol File

  • Creation of encrypted symbol files for import into Softing products
  • Output of exported symbols into encrypted secure .sdfi file
  • Full protection of Siemens project as only symbol information is stored
  • Chance to assign of read / write attributes for exported symbols at later stage

Perfect Addition to Softing Products

  • Software usable with dataFEED OPC Suite, dataFEED OPC Server Siemens, uaGate SI, edgeGate and echocollect e/r/m
  • Installation of dataFEED Exporter on the TIA computer required for export (Openness interface)
  • Free of charge when using Softing products
  • Supporting all current Windows operating systems as well as virtual environments

DataFEED Exporter

  • Simple item syntax export out of Siemens STEP 7 and TIA Portal projects
  • Generation of encrypted symbol file, for import into Softing products
  • For use with dataFEED OPC Suite, uaGate SI, edgeGate and echocollect e/r/m
Supported Controllers Siemens S7-300/400/1200/1500
Supported Engineering Tools SIMATIC STEP 7, TIA-Portal V13/V14/V15 including Service Packs
Supported Operation Systems Windows 7, Windows 8, Windows 8.1, Windows 10
Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Supported Data Types Bool, Byte, Char, Word, Int, DWord, Dint, Real, Date, Time_Of_Day, Time, S5Time, Date_And_Time, String, UInt, USInt, UDInt, Sint, Struct, 0xFFFF (Folder)
Licensing Free when using Softing products
Suitable for echocollect e/r/m, uaGate SI, edgeGate, Industrial IoT Starter Kit, dataFEED OPC Suite, dataFEED OPC Server Siemens
File size 85 MB
Output Encrypted secure Softing .sdfi data file

Retrouvez tous les téléchargements SOFTING  sur notre mirroir #1

INFORMATION DU  xx/xx/2017

Un lien vous sera envoyé pour le téléchargement


Driver Windows PROFIBUS 

 

https://www.atevatech.com/windowsdriver/

dataFEED Secure Integration Server

Serveur : dataFEED Secure Integration

Intégration IT/OT : Solution Sécurisée et fléxible basée sur l’OPC UA

dataFEED Secure Integration Server provides a powerful OPC UA data integration layer. Based on the OPC UA aggregation server users implement flexible solutions combining the various OPC UA Servers at automation level with their associated address spaces and making the data available to IT applications via a consistent OPC UA interface. dataFEED Secure Integration Server covers the full range of OPC UA security features and enables the implementation of state-of-the-art security solutions.

The interface abstraction of dataFEED Secure Integration Server enables continuous adaptation and scaling of OPC UA-based IoT solutions throughout their entire lifecycle. Users gain a high degree of flexibility and at the same time significantly reduce integration and configuration costs.

Secure Communication

  • Support of all safety functions of OPC UA standard
  • Provide different data for different users and applications
  • Support for multiple OPC UA Endpoints (client or server), each with its own certificates
  • Filtered access, depending on IP address (White List / Black List for OPC UA Endpoints)
  • Detection of DoS (Denial of Service) attacks on OPC UA authentication

Data Aggregation

  • Aggregation of data from multiple sources in a server (aggregation of OPC UA Namespace)
  • Application access to aggregation servers, not to many individual data sources
  • Extensive and flexible OPC UA Service-based address space filtering, down to OPC UA Item level
  • Reduced configuration effort (Configuration not required individually for each OPC UA data source and each OPC UA Client)

Interface Abstraction

  • Common, stable OT interface for different IT applications
  • Adaptations in automation network transparent for IT applications
  • Easy integration of IT applications with standard OPC UA Clients in different OT environments
  • Decoupling of investment decisions in IT and OT environment

Solutions for Edge Architectures

  • Edge solution with features and benefits identical to those resulting from using central cloud platforms
  • Running local clients (e.g. for edge analytics) in parallel with cloud-based applications
  • Start with small IoT solution on cloud basis, later adaptation and expansion over time possible
Key Functionality OPC UA Aggregation Server
OPC UA Namespace aggregation, 50 virtual namespaces maximum
OPC UA Server with up to 25 OPC UA Server endpoints, 50 users per endpoint, separate application certificate per endpoint
OPC UA Client with up to 100 connections to OPC UA Servers, separate application certificate per OPC UA connection
Up to 500,000 data changes per second
Supported OPC Specifications OPC Unified Architecture V1.03
OPC Roles OPC UA Client, OPC UA Server
OPC UA Profiles Data Access, Complex Data, Methods
OPC UA Transport TCP Transport, UA Binary Encoding, UA Secure Conversation
HTTPS Transport, UA Binary Encoding
OPC UA Security Security methods:
Aes256Sha256-RsaPss
Aes128SHA256-RsaOaep
Basic256Sha256
Basic256
Basic128Rsa15
NoneAuthentification:
Anonymous
user name and password
certificate
OPC UA Firewall OPC UA Service-based address space filtering, down to OPC UA Item level
Limitation of OPC UA Client conncetions
Restriction of OPC UA services
IP access filter (White List/Black List)
Detection of denial of service (DoS) attacks on OPC UA authentication
OPC Certification Test based on compliance test tools of OPC Foundation
Operation Mode Windows service
Logging, Diagnostics Detailed system and test logging
Test tools: OPC UA .NET Demo Server, OPC UA Demo Client
Supported Operating Systems 64 Bit operating systems only
Windows 7, Windows 8.1, Windows 10, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Linux on demand
Licensing Runtime license per computer
Single Seat License
LRL-DY-140001 dataFEED Secure Integration Server, version 1.01, single seat license for up to 10 OPC UA connections,
including maintenance and support contract for 1 year
LMA-DY-140001 dataFEED Secure Integration Server maintenance and support contract for 1 year, for up to 10 OPC UA connections
LRL-DY-140004 dataFEED Secure Integration Server, version 1.01, single seat license for up to 100 OPC UA connections,
including maintenance and support contract for 1 year
LMA-DY-140004 dataFEED Secure Integration Server maintenance and support contract for 1 year, for up to 100 OPC UA connections
Use License
LRL-DY-141001 dataFEED Secure Integration Server, version 1.01, use license for up to 10 OPC UA connections,
including maintenance and support contract for 1 year
LRL-DY-141004 dataFEED Secure Integration Server, version 1.01, use license for up to 100 OPC UA connections,
including maintenance and support contract for 1 year

Scope of Delivery

Software License key for dataFEED Secure Integration Server, link for software download
Documentation Online help in English

Additional Products and Services

LRL-DY-134501 dataFEED OPC Suite
GAA-DX-145111 uaGate SI
GAA-YE-145133 uaGate MB
100-1030-01 Training ”OPC Server and Client in Practice”