Ethernet IP – IEN-8648A-EIP

Switch managed, Ethernet/ip avec 8* RJ45 10/100/1000, 4* FX/Gbe SFP

IEN-8648A-EIP | Ethernet/IP

Hardware Features

8 x 10/100/1000 RJ45
4 x  FX/GbE SFP
1 x  USB port
IP30 Aluminum housing
EtherNet/IP Approval

Product Highlights

• Ethernet/IP approval for safe and reliable industrial applications
• EMS, ESD, Surge & Burst Protection
• Shock, Freefall and Vibration Proof
• MDI/MDI-X for plug-and-play
• Xpress Ring connectivity for a scalability
• Redundant Power Input & Relay Output Alarm
• SNMP v1/v2c/v3 and RMON for device management
• STP, RSTP for recovery in milliseconds and Dual Homing
• Traffic and Storm Control with QoS, IGMP Snooping for filtering traffic
• Operating temperature range between -40°C to 75°C
• USB Support for configuration and to save backups

 

Volktek’s Ethernet Industrial Protocol (EIP) certified IEN-8648A-EIP is a Managed Industrial switch equipped with 8 port 10/100/1000BASE-T, 4 Gigabit SFP slots and 1 USB slot. Assembled with hardened components and enclosed in a rugged aluminum case, the switch sustains severe industrial conditions, it operates between extreme temperatures of -40°C to 75°C and is highly tolerant to high vibration and shock.

Because of its particular software features, EIP switch is a real time saver. It can be quickly upgraded and its configurations can be saved by inserting a USB flash drive into its USB slot without the need of computers or on spot technicians. The EIP certified switches enable the real-time communication for automation control, by converging different floor networks with diversified procedures and tools into one.

Standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Flow Control
IEEE 802.3ad Link Aggregation
IEEE 802.1ab LLDP
IEEE 802.1D STP
IEEE 802.1w RSTP
IEEE 802.1s MSTP
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1X Port Authentication
Interface
Ports 8 x 10/100/1000BASE-T RJ45 Ports
4 x Gigabit SFP Slots
1 x RJ45 Console Port
1 x USB Port
DIP Switch Primary/Redundant Power Voltage Drop Alarm setting
LED Panel PWR, RPS, ALM, POST, 1000, LNK/ACT
Power
Input Voltage Primary inputs:12~60V DC
Redundant inputs:12~60V DC
Power Consumption System:18W
Alarm Relay One relay output, 1 A @ 24V DC
Mechanical and Environment
Housing Aluminum (IP30 Protection)
Mounting DIN-Rail
Operating Temperature -40°C~75°C
Storage Temperature -40°C~85°C
Operating Humidity 5 to 95% RH (non-condensing)
Storage Humidity 5 to 95% RH (non-condensing)
Dimension (WxHxD) 50x160x120mm (1.97×6.38×4.72inch)
Weight 955g
EUR
EUR Euro