Testeur PROFIBUS PA : BC-230-PB
Connectez vous pour commander en ligne
Testeur Profibus PA en region ATEX.
En stock
UGS : ATV-BC-230-PB
Catégories : PROCESS AUTOMATION, PROFIBUS, Tester, Testeur profibus
Description
BC-230-PB : Testeur Profibus PA : Pour les Zones ATEX et non-ATEX


Le testeur PROFIBUS PA ( BC-230-PB) est un outil pratique et indispensable pour les tests de réseaux PROFIBUS PA ( Zone ATEX et non ATEX )
Test du bus PA, facile et rapide
Le moniteur de diagnostic est un outil polyvalent et indispensable pour la mesure des réseaux Profibus PA. C’est auss un produit ATEX, ce qui en fait un appareil utilisable en zone a risque. Pas de besoin de batterie ni de source électrique externe.
Application universelle pour ce testeur profibus PA ( BC-230-PB )
- Test du bus physic
- Verification de la stabilité entre les différents devices
- Outil universel pour l’installation, la mise en service, la documentation, la maintenance préventive et le diagnostic
Très simple d’utilisation
- Outstanding ease of use based on display and two function buttons ▪ Clear classification of test results as either OK or BAD
- Ideal choice even for less experienced users
Test de bus totalement automatique
- Automatically powered by fieldbus and start of segment testing without operator intervention after attachment to PROFIBUS PA network
- Information in plain text, if measured data exceeds tolerance limits
- Measurement of segment voltage as well as average noise and peak noise for three frequency ranges
- Reliable detection of short circuits between individual signal wires and cable shield
- Detection of all frame retransmissions and all devices added or dropped during bus operation at field device level
- Determination of current and lowest signal levels of all devices
- No PC or notebook needed for testing the bus
- Internal storage of test data for later transfer to PC
- Detailed test reports in Microsoft Excel or text format
put voltage: | Fieldbus mode: 8 to 32 VDC, USB mode: 4.1 to 5.5 VDC |
Max. input current: | Fieldbus mode: 10 mA *, USB mode: 30 mA |
Power dissipation: | Fieldbus mode: max. 320 mW (at 32 VDC), USB mode: max. 165 mW (at 5.5 VDC) |
Operating temperature: | –20 to +50 °C ** |
Dimensions: | 146 x 88 x 28 mm |
Weight: | 378 g |
Case material: | ABS |
DC voltage measurement range: | 8 to 32 VDC ± 0.5 VDC |
Signal level measurement range: | 0.12 to 2 Vpp ±10% ±0.025 Vpp |
LF noise measurement range: | 50 Hz to 4 kHz, 0 to 1000 mVpp ±15% ±25 mVpp *** |
FF noise measurement range: | 9 kHz to 40 kHz, 0 to 1000 mVpp ±10% ±25 mVpp *** |
HF noise measurement range: | 90 kHz to 350 kHz, 0 to 250 mVpp ±20% ±25 mVpp *** |
Conformity | CE, FCC |
Hazardous area approvals | FM USA and Canada: —Class I Division 2 Groups A, B, C and D T4 —Class I Zone 2 Group IIC T4 —Class I Division 1 Groups A, B, C and D T4 —Class I Zone 0 and 1 Ex/AEx ia IIC T4 ATEX Ex ia IIC T4 ATEX Ex nL IIC T4 ATEX Ex ic IIC T4 |
Data transfer to PC | Via supplied PC software for Windows 2000, XP and VISTA, Windows 7 (32/64 bit) and USB interface version 1.1 or 2.0 |
* In fieldbus mode the BC-230-PB is powered by the fieldbus and draws approximately 9.4 mA of current from the segment (depending on bus voltage and ambient temperature). ** Display update speed is impaired below –10°C. *** Vpp = Volts peak-to-peak; excessive noise adjacent to the fieldbus frequency (FF) band will prevent the BC-230-PB from reading the fieldbus data and thus reduce functionality. |
BC-230-PB | Diagnostic Monitor for PROFIBUS PA |
Scope of Delivery
Hardware | Diagnostic Monitor for PROFIBUS PA (BC-230-PB), connection cables, carrying case |
Software | PC software (in English) on CD-ROM |
Documentation | Manual (in English), certificates (in English) |
Additional Products and Services
PB-LSZ-CHB3 | Digital fieldbus leakage current clamp for locating EMC problems, 40 Hz … 1,000 Hz, Min/Max, Data Hold, measuring cables, supplied in handy case |
Pour toute demande, nous consulter
Ce produit fait partie de la famille des “Process automation”. Afin de connaitre notre gamme complete de produits, vous pouvez télécharger notre brochure : Process Automation.